Learn to use VirtualBox. Get virtual computers up and running on your computer, without having to buy any new hardware.
With “Computer Inside Your Computer: How to Use VirtualBox” manual you’ll learn to master this free virtualization software and get virtual computers working inside your computer.
You’ve heard a lot about Linux and you’d love to try it out, but you don’t know enough to take the plunge and install it alongside Windows – maybe you’re worried you’ll wipe all your files off in the process. Besides, you’d like to have another computer handy so that you can look something up if you get stuck, but you don’t have another computer.
Good thing VirtualBox exists. With it you gain the power to conjure virtual computers out of thin air. They don’t take up space on your desk, yet they work just like a real computer does. They can be conjured up and removed with little more than a few clicks.
Intrigued? Featuring step-by-step explanations as well as picture tutorials, this manual makes using VirtualBox easy.
Enjoy and share!
Table of Contents
1. Introduction
If only you had more computers.
You’ve heard a lot about Linux and you’d love to try it out, but you don’t know enough to take the plunge and install it alongside Windows – maybe you’re worried you’ll wipe all your files off in the process. Besides, you’d like to have another computer handy so that you can look something up if you get stuck, but you don’t have another computer. This is it.
Or maybe it’s the opposite. Perhaps you’ve taken a step out of your comfort zone and ditched Windows – maybe for Ubuntu, or maybe for Mac OS X. You feel liberated! No more Blue Screens of Death! You’re living life on the edge, getting on with your work… and then you come to a screeching halt. You discover that a piece of software crucial to your workflow runs on Windows… and only Windows.
Whatever shall you do?
Does this mean that you have to go out and buy a new computer just to run this one program? Or, as an only marginally better prospect, will you have to install it alongside your current OS and restart every time you need to use it? Suddenly you realize that your freedom is only as long as the chain around your ankle.
That is until somebody introduces you to VirtualBox.
Suddenly you gain the power to conjure virtual computers out of thin air. They don’t take up space on your desk, yet they work just like a real computer does. They can be conjured up and removed with little more than a few clicks.
Intrigued? Read on.
2. Introduction to VirtualBox
2.1 What is VirtualBox?
VirtualBox is a free, open source, cross-platform application for creating, managing and running virtual machines (VMs) – computers whose hardware components are emulated by the host computer, the computer that runs the program. VirtualBox can run on Windows, Mac OS X, Linux, and Solaris.
This guide is based on the OS X version, but the steps are almost exactly the same regardless of the host operating system.
2.2 Why do I want it?
Using virtual machines can be extremely useful for a number of reasons. For example, you may want to run a virtual machine to try out software that you think might be unsafe, or you might want to try out another operating system without changing the way your computer is already set up.
You might also want to use it for security purposes; for example, you might want to create a virtual machine just for online banking so that you can be sure there are no spyware or trojans getting at your precious data.
Finally, you might want to get it because you can. VirtualBox is completely free – there’s no reason not to download it to have a tinker!
2.3 How do I get it?
The easiest way to get the latest version of VirtualBox is to download it from the download page of the VirtualBox website – www.virtualbox.org/wiki/Downloads. There you can download the correct version for your platform, or if you’re using Linux you can click through to find a list of instructions for various Linux distributions.
For each Linux distribution you’re given the option of downloading either the “i386” or “amd64” option. “i386” is the 32-bit version, “amd64” is the 64-bit version. If you’re not sure which version of the operating system you’re using you’re almost certainly using the 32-bit version and so you will want to download the “i386” version of VirtualBox.
Installing VirtualBox is just like installing any other program on your platform, so you shouldn’t have any problem with the installation. If you do get stuck though, you can read the installation guide on the VirtualBox website.
2.4 Using VirtualBox
When you start up VirtualBox for the first time you’ll be greeted by the VirtualBox Manager. This is where you can create virtual machines, turn them on or off and make changes to the virtual hardware available to them.
Obviously, VirtualBox isn’t much good like this – we need to make a virtual machine! I’ll be running through making virtual machines for Windows XP, Windows 7 and Ubuntu, as these are the most likely candidates for a VM.
However, don’t think that these are the only options that virtual machines have to offer. If you’re feeling brave, you might want to try one of the other Linux distributions, such as Debian (which Ubuntu is based on), Fedora or OpenSUSE. Or maybe Puppy Linux, or Arch Linux, or Linux Mint, or CentOS, or… well, you get the idea.
In the following sections, you will learn to create Windows XP, Windows 7 and Ubuntu virtual machines. Each step-by-step section is followed by numbered screenshots of the steps described. Feel free to consult both the instructions and the pictures as you build your machines.
3. Creating a WinXP Virtual Machine
Step 1 – The first step to creating any virtual machine is to click on the “New” button in the top left-hand corner of the VirtualBox Manager window – it’s a big blue star that’s pretty hard to miss!
This starts the “New Virtual Machine Wizard”, which will walk us through the steps required to get a new virtual machine up and running.
This starts the “New Virtual Machine Wizard”, which will walk us through the steps required to get a new virtual machine up and running.
Step 2 – Enter the name of the Virtual Machine. What you call it is entirely up to you – it’s really so that you can find a specific VM easily when you have many different VMs in the manager.
VirtualBox will try to figure out what OS you plan to run on the VM based on what you name it. If the name of the VM has “XP” in it somewhere it assumes that you’ll be installing Windows XP and will adjust itself accordingly. If you have a cryptic name for it, though, don’t worry. You can manually choose the OS type from the drop-down boxes below.
VirtualBox will try to figure out what OS you plan to run on the VM based on what you name it. If the name of the VM has “XP” in it somewhere it assumes that you’ll be installing Windows XP and will adjust itself accordingly. If you have a cryptic name for it, though, don’t worry. You can manually choose the OS type from the drop-down boxes below.
Once you’ve done that, click on “Continue” to go to the next step.
Step 3 – You’ll be asked to select the amount of RAM that you want to allocate to the virtual machine. The more you give the VM the smoother it’ll run, but be warned; memory allocated to the VM is a memory that the host OS (that is, the computer you’ve installed VirtualBox on) won’t be able to use.
So, how much RAM should you allocate to the VM? It depends on a number of things. If you’re planning to use only the VM while it’s running, you can afford to give it more RAM because you won’t be asking the host OS to be doing much multitasking. If on the other hand, you’ll be using the VM at the same time as doing lots of other things on the host OS, you’ll want to be more conservative with the amounts that you give out. However, a good general rule of thumb is to allocate half of your computer’s RAM to the VM. So, if your computer has 4GB of RAM, give 2GB to the VM leaving the host with the other 2GB.
So, how much RAM should you allocate to the VM? It depends on a number of things. If you’re planning to use only the VM while it’s running, you can afford to give it more RAM because you won’t be asking the host OS to be doing much multitasking. If on the other hand, you’ll be using the VM at the same time as doing lots of other things on the host OS, you’ll want to be more conservative with the amounts that you give out. However, a good general rule of thumb is to allocate half of your computer’s RAM to the VM. So, if your computer has 4GB of RAM, give 2GB to the VM leaving the host with the other 2GB.
As far as hard numbers go, Windows XP can run well on 512MB of RAM, or if you’re feeling generous you can push the boat out and give it a full 1024MB (1GB), so I’d recommend allocating between these two numbers.
Time to click on “Continue” again!
Step 4 – The next step is to create a “Virtual Hard Disk” (VHD). This creates a file on your hard drive which can be used by VirtualBox to act like its own separate hard drive, allowing you to install an operating system without worrying about wiping over your existing data.
Make sure that “Boot Hard Disk” and “Create new hard disk” are selected, then click “Continue”. This will start the “Create New Virtual Disk Wizard”. Click “Continue” again to proceed.
Next, you’ll be asked if you want to create a “dynamically expanding” disk (which I’ll call a dynamic disk from now on) or a “fixed size” disk. Each has its own benefits. The great thing about a dynamic disk is that it’s only as large as the data that it has on it; you can assign it plenty of space without having to worry about whether you’ll use it or whether you’ll run out of space. They’re also a lot faster to create than a fixed disk of any significant size.
However, you’ll need to keep an eye on it, because its flexibility can also be its downfall. Say you create a dynamic disk and assign it 50 GB, then put about 20GB of data on it. The dynamic disk file will show up as taking only 20GB of space on the hard drive according to your host OS. Great. You fill up the rest of the free space on your physical hard drive.
Next, you’ll be asked if you want to create a “dynamically expanding” disk (which I’ll call a dynamic disk from now on) or a “fixed size” disk. Each has its own benefits. The great thing about a dynamic disk is that it’s only as large as the data that it has on it; you can assign it plenty of space without having to worry about whether you’ll use it or whether you’ll run out of space. They’re also a lot faster to create than a fixed disk of any significant size.
However, you’ll need to keep an eye on it, because its flexibility can also be its downfall. Say you create a dynamic disk and assign it 50 GB, then put about 20GB of data on it. The dynamic disk file will show up as taking only 20GB of space on the hard drive according to your host OS. Great. You fill up the rest of the free space on your physical hard drive.
Thing is, if you start up the VM and try to add more data to the dynamic disk, you’ll run into trouble – the virtual disk says that it’s still got 30GB free, but there’s nowhere to actually put that 30GB of data. The VM freaks out, thinking that the hard drive is failing, but that’s not true. It just needs some more breathing room on the physical drive to store the data it’s been told it’s able to save.
This is the advantage of the fixed size disk. Sure, it’s inconvenient when you’re trying to figure out how much space to give it, but once it’s been made you won’t have to worry about it ever again.
In this example, we’ll be using dynamic disks, but fixed disks will work just as well. Make sure that “Dynamically expanding storage” is selected, then click on “Continue” again.
Next, you’re asked to choose the name, location, and size of the new VHD. For most uses, you won’t need to change the name or the location, but you can do this by clicking on the folder icon next to the text box.
The size you should make the VHD depends on how much stuff you plan to put in it, but if you’re using a dynamic disk it doesn’t really matter if you allocate it lots of space. If you’re just using it to run a few programs, the suggested size of 10GB should be plenty! Make sure the settings are right then click “Continue”, then “Done”.
Step 5 – At this point, all you need to do is check over everything and make sure all the settings are as you expect them to be. Then you just need to click “Done” and the VM will be created, ready for you to install Windows!
Step 6 – Now it’s time to start up the VM for the first time. Make sure that the new virtual machine that you just created is selected in the VirtualBox Manager window, then click on the “Start” button at the top of the window.
Step 7 – When the VM starts up you’ll be greeted by the “First Run Wizard”, which will guide you through getting ready to install Windows XP. Click “Continue”.
It’ll then ask you what you want to use for installation media; that is, whether you want to install it using a CD and the host’s optical drive, or whether you want to install it from a disk image on your hard drive (usually in the form of a .iso file). You can choose the former from the drop-down menu or the latter by browsing for the .iso file (using a standard “open file” dialog).
Once you’ve chosen the installation media, click on “Continue”, then “Done” after reading the summary.
Step 8 – Since there isn’t anything installed on the virtual hard disk the virtual machine will automatically boot from the CD into Windows Setup. It’ll take a while for setup to load all the files it needs, but eventually, you’ll see a screen that shows a list of the existing partitions and unpartitioned space on the computer. In the list, all you’ll see is an “Unpartitioned space” the size of the VHD you created in Step 3. You want to set up XP here, so press “ENTER”.
You’ll then be asked how you want to format the drive. You’ll most definitely want to choose the option “Format the partition using the NTFS file system (Quick)”. Make sure you choose the “Quick” option or you’ll be waiting for a very long time! That’s all you’ll need to do for a little while – Windows Setup will format the VHD then start copying files to the drive. You can sit and watch or go get a cup of coffee; it doesn’t really matter. Once it’s finished copying files Windows Setup will automatically restart your computer to proceed to the next step.
Step 9 – When the computer restarts it will try to boot from the CD first, saying “press any key to boot from CD…”. Ignore this! If you do this you’ll be doing step 7 all over again for no reason. You can prevent this from happening again by right-clicking the CD icon at the bottom of the VM window and clicking “Remove disk from virtual drive”. Once it passes, you’ll see the familiar Windows XP booting screen before the screen switches to the second stage of installation.
You’ll probably see a dialog box come up a few times during the installation about the guest OS not supporting “mouse pointer integration”. Don’t worry about this – tell it not to show the option again and then click OK to dismiss it.
The size you should make the VHD depends on how much stuff you plan to put in it, but if you’re using a dynamic disk it doesn’t really matter if you allocate it lots of space. If you’re just using it to run a few programs, the suggested size of 10GB should be plenty! Make sure the settings are right then click “Continue”, then “Done”.
Step 5 – At this point, all you need to do is check over everything and make sure all the settings are as you expect them to be. Then you just need to click “Done” and the VM will be created, ready for you to install Windows!
Step 6 – Now it’s time to start up the VM for the first time. Make sure that the new virtual machine that you just created is selected in the VirtualBox Manager window, then click on the “Start” button at the top of the window.
Step 7 – When the VM starts up you’ll be greeted by the “First Run Wizard”, which will guide you through getting ready to install Windows XP. Click “Continue”.
It’ll then ask you what you want to use for installation media; that is, whether you want to install it using a CD and the host’s optical drive, or whether you want to install it from a disk image on your hard drive (usually in the form of a .iso file). You can choose the former from the drop-down menu or the latter by browsing for the .iso file (using a standard “open file” dialog).
Once you’ve chosen the installation media, click on “Continue”, then “Done” after reading the summary.
Step 8 – Since there isn’t anything installed on the virtual hard disk the virtual machine will automatically boot from the CD into Windows Setup. It’ll take a while for setup to load all the files it needs, but eventually, you’ll see a screen that shows a list of the existing partitions and unpartitioned space on the computer. In the list, all you’ll see is an “Unpartitioned space” the size of the VHD you created in Step 3. You want to set up XP here, so press “ENTER”.
You’ll then be asked how you want to format the drive. You’ll most definitely want to choose the option “Format the partition using the NTFS file system (Quick)”. Make sure you choose the “Quick” option or you’ll be waiting for a very long time! That’s all you’ll need to do for a little while – Windows Setup will format the VHD then start copying files to the drive. You can sit and watch or go get a cup of coffee; it doesn’t really matter. Once it’s finished copying files Windows Setup will automatically restart your computer to proceed to the next step.
Step 9 – When the computer restarts it will try to boot from the CD first, saying “press any key to boot from CD…”. Ignore this! If you do this you’ll be doing step 7 all over again for no reason. You can prevent this from happening again by right-clicking the CD icon at the bottom of the VM window and clicking “Remove disk from virtual drive”. Once it passes, you’ll see the familiar Windows XP booting screen before the screen switches to the second stage of installation.
You’ll probably see a dialog box come up a few times during the installation about the guest OS not supporting “mouse pointer integration”. Don’t worry about this – tell it not to show the option again and then click OK to dismiss it.
You’ll be waiting for a little while longer, until…
Step 10 – The “Windows XP Setup Wizard” will pop up. Click “Next” to get started. First, you’ll be asked to set you're regional and language options, which basically involves clicking on “Customize…” to choose your country and then “Details” if you need to change your keyboard layout. Once that’s sorted, click “Next” again.
Next, you’ll need to enter a computer name and an Administrator password. I’d suggest a name that is actually useful instead of the random string of characters produced automatically. How complex you want to make the administrator password is up to you, depending on how important the security of the VM is.
After clicking “Next” you’ll see the date and time settings, which you shouldn’t have to change. Clicking “Next” again will make the window disappear for a while as Windows applies all the settings and continues with the installation. After a minute or two goes by another window will pop up, this time for network settings. You’ll almost certainly want to select the first option (a network that has no domain). It requires that you enter the name of a workgroup – the default workgroup name for Windows XP computers is “WORKGROUP”. Enter that into the text box and then click “Next”.
That’s it for Windows Setup! It’ll take a few minutes for Windows to finalize the installation, then it will restart automatically once more when it’s finished.
After clicking “Next” you’ll see the date and time settings, which you shouldn’t have to change. Clicking “Next” again will make the window disappear for a while as Windows applies all the settings and continues with the installation. After a minute or two goes by another window will pop up, this time for network settings. You’ll almost certainly want to select the first option (a network that has no domain). It requires that you enter the name of a workgroup – the default workgroup name for Windows XP computers is “WORKGROUP”. Enter that into the text box and then click “Next”.
That’s it for Windows Setup! It’ll take a few minutes for Windows to finalize the installation, then it will restart automatically once more when it’s finished.
Step 11 – We’re at the last step for installing Windows XP itself. Now we just need to enter in some final details like networking and creating a username.
As Windows starts up again a dialog box will pop up saying that it will adjust the screen resolution to approve the appearance of visual elements. Just click “OK” then “OK” again on the next window that pops up to confirm the change.
Now you’ll see the “Welcome to Windows” screen. Click “Next” in the bottom right-hand corner of the screen to get started.
You’ll be asked if you want to use Automatic Updates; you most certainly do! Make sure the first option is selected before clicking “Next”.
The way that VirtualBox provides a network connection to the VM means that you’ll definitely want to choose the first option (“Yes, this computer will connect to a local area network or home network”). Make sure that’s selected, then click “Next”.
There’s little point in registering with Microsoft, so click No, then “Next”. In the next step, you’ll be asked to enter a username – enter one then click “Next”. After that you just need to click “Finish”, then you’re all done!
You’ll see the “welcome” screen, and then the familiar Windows XP desktop. Great! You’re all done with installing Windows. However, we’re not done yet! Go to the VM’s start menu and shut it down, because there’s one thing left to do; installing VirtualBox’s “Guest Additions”.
There’s little point in registering with Microsoft, so click No, then “Next”. In the next step, you’ll be asked to enter a username – enter one then click “Next”. After that you just need to click “Finish”, then you’re all done!
You’ll see the “welcome” screen, and then the familiar Windows XP desktop. Great! You’re all done with installing Windows. However, we’re not done yet! Go to the VM’s start menu and shut it down, because there’s one thing left to do; installing VirtualBox’s “Guest Additions”.
3.1 Guest Additions
“What are Guest Additions?” I hear you ask. The Guest Additions are a set of drivers and software which comes with VirtualBox to make using VirtualBox in conjunction with the host computer a little easier. Installing Guest Additions isn’t compulsory at all, but it’s most definitely recommended.
There are a few features that you’ll get by installing Guest Additions. The main one is called mouse pointer integration. You may have noticed that when using the VM you had to click inside the window for the VM to detect any mouse movements (or to type), and that you needed to press a specific key (called the host key) to release the mouse and keyboard so that you could use them with the host computer again.
With mouse pointer integration, you no longer have to click inside the window to use your keyboard and mouse in the VM or use the host key to release them. As you move your pointer over the window it is automatically “captured”, and it is automatically released when the pointer reaches the edge of the window. This by itself is worth installing Guest Additions for!
The second main feature is shared folders. This basically allows folders on your host machine to show up as network shares on the guest OS, allowing you to access files which would otherwise be inaccessible.
There are other useful features like better video support and seamless windows – you can read more about them in the VirtualBox documentation.
To install Guest Additions properly, you’ll need to start Windows XP in Safe Mode. This basically means that Windows starts up running nothing but the bare essential drivers. In this mode, VirtualBox is able to install its Guest Additions without messing with drivers which would otherwise be in use.
Step 1 – Before you start there’s a couple of settings you’ll need to change. Make sure that the Windows XP VM is selected in the VirtualBox Manager, then click on the “Settings” button between “New” and “Start”.
You’ll want to go to the “Display” tab. There you’ll want to give the VM at least 32MB of video memory; ideally, you’ll want to allocate 64MB. You’ll also want to enable both 3D and 2D Video Acceleration.
You’ll want to go to the “Display” tab. There you’ll want to give the VM at least 32MB of video memory; ideally, you’ll want to allocate 64MB. You’ll also want to enable both 3D and 2D Video Acceleration.
Step 2 – It’s time to start up the VM again. To start Windows up into Safe Mode, you’ll need to constantly press F8 (Fn+F8 on a Mac and some Windows laptops) until you see the “Windows Advanced Options Menu”. Here you’ll want to select Safe Mode using the arrow keys and then press Enter.
You’ll see a long list of seemingly random text – this is a list of the exact drivers that Windows is loading to be used in Safe Mode. Windows will boot after this.
You’ll see a long list of seemingly random text – this is a list of the exact drivers that Windows is loading to be used in Safe Mode. Windows will boot after this.
Step 3 – Once you’ve logged in as Administrator, a window mentioning Safe Mode will pop up; it’s safe to dismiss it straight away.
Now, go to the Devices menu for the VM; on OS X this can be found in the menu bar while the VM window is selected, or for Windows/Linux it will be at the top of the VM window itself (you might have to press the “alt” key to reveal it). Here you’ll see an option labeled “Install Guest Additions…”. Clicking on this will mount a .iso file as a CD on the VM.
Step 4 – Once the Guest Additions CD has been mounted the setup wizard should automatically pop up. If it doesn’t, go to “My Computer” and click on the CD to start it (which should be D: by default).
The setup is fairly straightforward, and all the default values are good. You might want to select “Direct3D Support” when asked to choose components, though. While chances are you won’t be using the VM for anything that actually uses Direct3D, you might as well have it installed now rather than having to do this all again later if you do need it for some reason.
Step 4 – Once the Guest Additions CD has been mounted the setup wizard should automatically pop up. If it doesn’t, go to “My Computer” and click on the CD to start it (which should be D: by default).
The setup is fairly straightforward, and all the default values are good. You might want to select “Direct3D Support” when asked to choose components, though. While chances are you won’t be using the VM for anything that actually uses Direct3D, you might as well have it installed now rather than having to do this all again later if you do need it for some reason.
After finishing the installation you’ll be asked to reboot the computer. That’s it! When you restart the computer allow it to boot normally. You should be logged automatically into the standard account and able to actually start using the VM like a normal computer.
4. Creating a Win7 Virtual Machine
Installing Windows 7 isn’t much different to installing Windows XP. Having said that, there are a few changes to make the installation a little more user-friendly.
It’s important to note before we start that VirtualBox’s video drivers don’t support Windows Aero. That means that you won’t get window transparency, Windows Snap or window thumbnails in the taskbar, among other things. If these features are essential for you, you might need to consider a paid alternative such as VMWare.
If you’ve jumped straight to this, you might want to go back and read the Windows XP section first, since I’ve introduced a lot of new terminologies and explained a lot of what’s going on here. With that said, let’s get started!
Step 1 – In the VirtualBox Manager window, click on the “New” button in the top left-hand corner to create a new Virtual Machine. Give the VM a name and select “Windows 7” as the type of OS if it’s not automatically selected based on the name before clicking “Next” to go to the next step.
Step 2 – For Windows 7 you’ll want to provide the VM with at least 1024MB (1GB); 2GB is better, or more if you have more than 4GB on your host computer. Remember not to give it too much, though – if your host OS starts running out of RAM it could actually decrease performance! Click “Next” again.
Step 3 – Now it’s time to create a Virtual Hard Disk (VHD) for the VM. I’d suggest creating a dynamic disk, but if you have plenty of desktop space you might prefer to create a fixed disk. Windows 7 takes up a lot more space than XP, so you’ll want to allocate at least 20GB to this VHD. Click “Continue”, then “Done” to exit the VHD Creation Wizard.
Step 4 – Check through the summary to make sure everything is as it should be, then click on “Done” to finish creating the VM.
Step 5 – Start the VM using the “Start” button on the top left of the VirtualBox Manager. When the First Run Wizard comes up, select the installation media you want to use to install Windows 7 (either your host’s CD drive or a .iso file), then click “Next” and “Done” to get started with the installation.
Step 6 – Because there’s nothing installed Windows will automatically start loading Windows Setup. You’ll see a progress bar labeled “Windows is loading files…” before a window pops up called “Install Windows”. Select the language, time and currency format and keyboard layout that’s right for you before clicking “Next”.
Note: With some versions of VirtualBox on some platforms, you may get an error as Windows tries to start which says “Windows failed to start” and that this could be due to a recent hardware change. If you receive this error, power down the VM (by closing the VM window), going to the VM’s settings (select the VM in the VirtualBox Manager then click on the “Settings” button), choosing “System”, then under the “Motherboard” tab selecting the option “Enable IO APIC”.
Then click on the button labeled “Install Now”.
Step 7 – The next step requires you to accept Windows 7’s license terms. Click the checkbox before clicking “Next”.
When asked what kind of installation you want, you’ll need to select a “Custom” installation as there’s nothing to upgrade from.
Next, you’ll be asked where you want to install Windows. The only option will be the unallocated space of the unformatted VHD which you created in Step 3. All you need to do is click on “Next” to start the installation.
Windows Setup will take it from there – you won’t need to touch anything until it automatically boots into Windows once it finishes installing everything.
Step 8 – The first window you see when Windows 7 reboots will ask you to enter a username and to give the computer a name so it can be identified on a network. To this end, it’s probably worth giving it a name such as “Win7-VM”.
When you click “Next”, you’ll be asked to provide a password. While this isn’t essential (particularly since it’s probably password protected by the Host OS and isn’t likely to have any sensitive data stored on it), you may still feel more comfortable entering a password. It’s up to you. Either way, click on “Next” when you’re ready to proceed.
It’s at this point that you’re asked to enter your Windows 7 product key. You can either enter it here and get it over and done with, or you can enter it in later once you’re on the Windows desktop. Again, either way, click on “Next” when you’re ready to proceed.
You’ll want to use the recommended settings for Windows update, or you may choose to install only important updates if you know what you’re doing. Next, confirm that the time and date settings are correct, then click “Next”.
If you’re already connected to a network, the last step will be to choose what kind of network you’re connected to Home, work or public.
After that, all that’s left is for Windows to finalize a few settings itself and prepare your desktop! Then hey presto, you’ll be looking at a Windows 7 desktop, ready to go. Well, except for Guest Additions and essential software, of course. So, shut down Windows and we’ll get this done, shall we?
Step 2 – For Windows 7 you’ll want to provide the VM with at least 1024MB (1GB); 2GB is better, or more if you have more than 4GB on your host computer. Remember not to give it too much, though – if your host OS starts running out of RAM it could actually decrease performance! Click “Next” again.
Step 3 – Now it’s time to create a Virtual Hard Disk (VHD) for the VM. I’d suggest creating a dynamic disk, but if you have plenty of desktop space you might prefer to create a fixed disk. Windows 7 takes up a lot more space than XP, so you’ll want to allocate at least 20GB to this VHD. Click “Continue”, then “Done” to exit the VHD Creation Wizard.
Step 4 – Check through the summary to make sure everything is as it should be, then click on “Done” to finish creating the VM.
Step 5 – Start the VM using the “Start” button on the top left of the VirtualBox Manager. When the First Run Wizard comes up, select the installation media you want to use to install Windows 7 (either your host’s CD drive or a .iso file), then click “Next” and “Done” to get started with the installation.
Step 6 – Because there’s nothing installed Windows will automatically start loading Windows Setup. You’ll see a progress bar labeled “Windows is loading files…” before a window pops up called “Install Windows”. Select the language, time and currency format and keyboard layout that’s right for you before clicking “Next”.
Note: With some versions of VirtualBox on some platforms, you may get an error as Windows tries to start which says “Windows failed to start” and that this could be due to a recent hardware change. If you receive this error, power down the VM (by closing the VM window), going to the VM’s settings (select the VM in the VirtualBox Manager then click on the “Settings” button), choosing “System”, then under the “Motherboard” tab selecting the option “Enable IO APIC”.
Step 8 – The first window you see when Windows 7 reboots will ask you to enter a username and to give the computer a name so it can be identified on a network. To this end, it’s probably worth giving it a name such as “Win7-VM”.
You’ll want to use the recommended settings for Windows update, or you may choose to install only important updates if you know what you’re doing. Next, confirm that the time and date settings are correct, then click “Next”.
After that, all that’s left is for Windows to finalize a few settings itself and prepare your desktop! Then hey presto, you’ll be looking at a Windows 7 desktop, ready to go. Well, except for Guest Additions and essential software, of course. So, shut down Windows and we’ll get this done, shall we?
4.1 Guest Additions
Just like when we installed Windows XP, we’ll need to boot Windows into Safe Mode to install Guest Additions properly.
Step 1 – First you’ll need to change a few VM settings. Select the VM in the VirtualBox Manager, then click “Settings”. Choose the “Display” section. You’ll want to allocate at least 64MB of Video Memory for Windows 7; more if you can spare it. You’ll also want to enable 3D and 2D Video acceleration. Click “OK” to save these changes.
Step 2 – When you start up the VM again, make sure to keep pressing F8 (Fn+F8 on Macs and some other laptops), then select “Safe Mode”. Just like Windows XP, you’ll see a long list of white text on a black background – this is a list of the drivers that Windows is loading.
Step 3 – Windows should log straight in – if for some reason you see the login screen, select your username and enter your password. You’ll see a notice about being in Safe Mode; it’s fine to dismiss it straight away.
Now it’s time to mount the Guest Additions CD – go to the VM’s “Devices” menu (found in the Menu bar on OS X while the VM is selected or at the top of the VM window on Windows/Linux) and select “Install Guest Additions…”.
Once the CD is mounted, go to My Computer and right-click on the D: Drive, then select “Install or run the program from your media”.
Step 4 – This is a very straightforward installation. All the default options are great, although again you may wish to check “Direct3D Support” as one of the components to be installed.
When the installation is finished you’ll be asked to restart the computer. Restart the computer and allow it to boot up normally. There you go! There’s your Windows 7 VM ready to use. Enjoy!
Step 2 – When you start up the VM again, make sure to keep pressing F8 (Fn+F8 on Macs and some other laptops), then select “Safe Mode”. Just like Windows XP, you’ll see a long list of white text on a black background – this is a list of the drivers that Windows is loading.
Step 3 – Windows should log straight in – if for some reason you see the login screen, select your username and enter your password. You’ll see a notice about being in Safe Mode; it’s fine to dismiss it straight away.
Step 3 – Windows should log straight in – if for some reason you see the login screen, select your username and enter your password. You’ll see a notice about being in Safe Mode; it’s fine to dismiss it straight away.
Now it’s time to mount the Guest Additions CD – go to the VM’s “Devices” menu (found in the Menu bar on OS X while the VM is selected or at the top of the VM window on Windows/Linux) and select “Install Guest Additions…”.
Once the CD is mounted, go to My Computer and right-click on the D: Drive, then select “Install or run the program from your media”.
Once the CD is mounted, go to My Computer and right-click on the D: Drive, then select “Install or run the program from your media”.
Step 4 – This is a very straightforward installation. All the default options are great, although again you may wish to check “Direct3D Support” as one of the components to be installed.
When the installation is finished you’ll be asked to restart the computer. Restart the computer and allow it to boot up normally. There you go! There’s your Windows 7 VM ready to use. Enjoy!
When the installation is finished you’ll be asked to restart the computer. Restart the computer and allow it to boot up normally. There you go! There’s your Windows 7 VM ready to use. Enjoy!
5. Creating an Ubuntu Virtual Machine
Installing Ubuntu is really easy. The most popular Linux distribution for desktops has become much more user-friendly over the last few years as it strives to become a viable alternative to Windows and Mac OS X when it comes to everyday use.
Again, if you’ve skipped straight to this section I’d recommend going back and reading the Windows XP section. I’ve explained a lot of the terminology and the different settings.
Step 1 – To create a new VM, click on the “New” button in the top left-hand corner of the VirtualBox Manager window. Give the VM a name and make sure that the operating system and version are “Linux” and “Ubuntu”, respectively. Click “Next”.
Step 2 – For Ubuntu, I would recommend at least 1GB of RAM, although being more lightweight than most recent operating systems it will still run quite happily on 512MB.
Step 3 – Now you’ll need to create a VHD for the VM. Again, I’d suggest the use of a dynamic disk, but it’s up to you. VirtualBox suggests a minimum of 8GB for an Ubuntu VM (A fresh Ubuntu installation only takes up around 3GB compared to the 6GB taken up by a new Windows 7 installation!). If you’re just experimenting then this should be more than enough, otherwise, you might want to allocate more. Once you’ve made a decision, click “Continue”, then “Done” to exit the VHD wizard.
Step 4 – Check the summary to make sure everything looks right, then click on “Done” to finish creating the VM.
Step 5 – Start the VM using the “Start” button at the top of the VirtualBox Manager window. When you see the First Run Wizard, you’ll be asked to choose the installation media. If, like me, you’ve just downloaded the latest version of Ubuntu as a .iso file and want to use that, click on the folder icon and browse to its location to open it. If you have a CD, you can choose your optical drive from the drop-down list.
Either way, once you’ve chosen the source click “Next” and “Done” to finish with the Wizard and start up the VM.
Step 6 – When the VM boots from the CD you’ll be given a list of options. You could choose to load Ubuntu and try it before you install it, but since this is a VM you might as well just install it straight away. Choose “Install Ubuntu” with the arrow keys on your keyboard and press “Enter”.
Step 7 – Once Ubuntu has loaded the required files you’ll see the installation window. Choose your language, then click “Forward”.
You’ll then be given a checklist for the best results when installing Ubuntu. You’ll probably want to make sure that “Download updates while installing” and “Install this third-party software” are also selected before you click “Forward” again.
Next, you’re asked how you want to allocate drive space. We’ve already done this by creating a VHD, so just click “Erase disk and install Ubuntu”, and click “Forward”, then “Install now”. Don’t worry; this won’t erase all your data! It simply formats the VHD which you created.
This will start the installation process, as you’ll see from the progress bar which appears at the bottom of the wizard’s window that is labeled “Copying files…” If you’re interested, you can click on the arrow to show the terminal and see all the code that is being run.
Step 8 – After a little while, the next part of the installation will come up. The first step asks you to specify your location (to set date and time as well as locality options. You’ll then be asked to choose your keyboard layout.
Finally, you’ll be asked to enter your name, the computer’s name, a username, and password. Unlike Windows installations, you must enter a password as this is used as protection against potentially harmful operations through the terminal. Don’t worry, though – you can opt to log in automatically without entering a password.
That’s the last step that you have any major part in – Ubuntu will finish copying files and then automatically download repository lists for the software center, and, if you selected them in step 7, any updates. Once it’s finished, you’ll receive a notice that installation is complete, at which point you’ll need to click the button to restart the Virtual Machine.
Before the VM shuts down, you’re asked to remove any installation media before pressing “Enter”. To do this, right click on the CD icon at the bottom of the VM window and click “Remove disk from virtual drive”.
Step 2 – For Ubuntu, I would recommend at least 1GB of RAM, although being more lightweight than most recent operating systems it will still run quite happily on 512MB.
Step 3 – Now you’ll need to create a VHD for the VM. Again, I’d suggest the use of a dynamic disk, but it’s up to you. VirtualBox suggests a minimum of 8GB for an Ubuntu VM (A fresh Ubuntu installation only takes up around 3GB compared to the 6GB taken up by a new Windows 7 installation!). If you’re just experimenting then this should be more than enough, otherwise, you might want to allocate more. Once you’ve made a decision, click “Continue”, then “Done” to exit the VHD wizard.
Step 4 – Check the summary to make sure everything looks right, then click on “Done” to finish creating the VM.
Step 5 – Start the VM using the “Start” button at the top of the VirtualBox Manager window. When you see the First Run Wizard, you’ll be asked to choose the installation media. If, like me, you’ve just downloaded the latest version of Ubuntu as a .iso file and want to use that, click on the folder icon and browse to its location to open it. If you have a CD, you can choose your optical drive from the drop-down list.
Step 6 – When the VM boots from the CD you’ll be given a list of options. You could choose to load Ubuntu and try it before you install it, but since this is a VM you might as well just install it straight away. Choose “Install Ubuntu” with the arrow keys on your keyboard and press “Enter”.
Step 7 – Once Ubuntu has loaded the required files you’ll see the installation window. Choose your language, then click “Forward”.
This will start the installation process, as you’ll see from the progress bar which appears at the bottom of the wizard’s window that is labeled “Copying files…” If you’re interested, you can click on the arrow to show the terminal and see all the code that is being run.
Step 8 – After a little while, the next part of the installation will come up. The first step asks you to specify your location (to set date and time as well as locality options. You’ll then be asked to choose your keyboard layout.
Finally, you’ll be asked to enter your name, the computer’s name, a username, and password. Unlike Windows installations, you must enter a password as this is used as protection against potentially harmful operations through the terminal. Don’t worry, though – you can opt to log in automatically without entering a password.
That’s the last step that you have any major part in – Ubuntu will finish copying files and then automatically download repository lists for the software center, and, if you selected them in step 7, any updates. Once it’s finished, you’ll receive a notice that installation is complete, at which point you’ll need to click the button to restart the Virtual Machine.
Before the VM shuts down, you’re asked to remove any installation media before pressing “Enter”. To do this, right click on the CD icon at the bottom of the VM window and click “Remove disk from virtual drive”.
5.1 Guest Additions
Guest Additions for Ubuntu are a funny thing. Ubuntu (like many other Linux distributions) has some VirtualBox utilities already installed, such as mouse pointer integration – you may have noticed this during Setup.
However, not all Guest additions are installed, and the ones that are installed are somewhat out of date.
You’ll notice that when Ubuntu boots for the first time, an error will pop up before you logging in that “It seems that you do not have the hardware required to run Unity.” Unity is Ubuntu’s new GUI which maximises screen real estate and aims to make things more user-friendly. You can read more about it over at the main MakeUseOf site.
If Unity doesn’t do anything for you, installing the latest Guest Additions doesn’t bring all that much to the table. If the reason why you installed Ubuntu was to try Unity out, though, you’ll need to install the latest version.
Unlike the Windows Guest Additions, the Guest Additions CD provided by VirtualBox can be quite difficult to install. So, instead of using that method we’ll be installing them directly from a repository using the terminal. Don’t worry, it’s easy and I’ll walk you through it, step by step!
Step 1 – Shut down the Ubuntu VM if you haven’t already because we have some settings to change. Now, click on the “Settings” button in the top left-hand corner of the VirtualBox Manager window. Go to the “Display” tab. You’ll want to allocate 64MB or more of VRAM and enable 3D acceleration.
Step 2 – Start the VM again, then open a Terminal window. You can find Terminal by clicking Applications > Accessories > Terminal in the top left-hand corner of Ubuntu’s “screen”.
Step 3 – Now it’s time to enter some commands. First, enter this:
sudo apt-get update
The sudo command allows commands to be carried out as root, the administrator account. You’ll be asked to enter your password to authorize all following sudo commands until the terminal is closed or left to idle.
The apt-get command runs Ubuntu’s Advanced Packaging Tool (APT), which is used to install, update and remove programs and system files. The update part is a command for apt-get, telling it to update its index of available packages. This makes sure that you definitely download and install the latest versions.
Next, enter:
sudo apt-get install VirtualBox-ose-guest-utils –y
The install command is also for apt-get, telling it to download and install the package called VirtualBox-use-guest-utils, which is the Guest Additions that we’re looking for. –y is a switch, which tells apt-get to just go ahead and install the package without asking for confirmation.>
Finally, enter:
sudo reboot
Finally, the reboot command tells the VM to restart straight away. Now, if it’s all gone without a hitch, Ubuntu will restart with the Unity interface. Ready to go!
You’ll notice that when Ubuntu boots for the first time, an error will pop up before you logging in that “It seems that you do not have the hardware required to run Unity.” Unity is Ubuntu’s new GUI which maximises screen real estate and aims to make things more user-friendly. You can read more about it over at the main MakeUseOf site.
Step 2 – Start the VM again, then open a Terminal window. You can find Terminal by clicking Applications > Accessories > Terminal in the top left-hand corner of Ubuntu’s “screen”.
Step 3 – Now it’s time to enter some commands. First, enter this:
The sudo command allows commands to be carried out as root, the administrator account. You’ll be asked to enter your password to authorize all following sudo commands until the terminal is closed or left to idle.
The install command is also for apt-get, telling it to download and install the package called VirtualBox-use-guest-utils, which is the Guest Additions that we’re looking for. –y is a switch, which tells apt-get to just go ahead and install the package without asking for confirmation.>
Finally, the reboot command tells the VM to restart straight away. Now, if it’s all gone without a hitch, Ubuntu will restart with the Unity interface. Ready to go!
ReplyDeleteIf you ever want to change or up your university grades contact cybergolden hacker he'll get it done and show a proof of work done before payment. He's efficient, reliable and affordable. He can also perform all sorts of hacks including text, whatsapp, password decrypt,hack any mobile phone, Escape Bancruptcy, Delete Criminal Records and the rest
Email: cybergoldenhacker at gmail dot com